Product Features
1. The explosion-proof type of the lamp is gas explosion-proof composite type or gas explosion-proof "n" type or dust explosion-proof type, suitable for lighting in gas or dust explosion hazardous places.
2. The luminaire is mainly composed of an increased safety light source cavity, an explosion-proof electrical cavity and a mounting bracket.
3. The lamp housing is die-casted from aluminum alloy, flat tempered glass translucent plate, and reflector is arranged in the light source cavity. Polyester powder coating on the surface of the lamp housing.
4. The rubber explosion-proof cavity is equipped with rubber gasket on the joint surface to improve the overall protection performance of the lamp. It is suitable for use in wet or outdoor explosion hazardous places.
5. The lamp has the advantages of good corrosion resistance, high luminous efficiency, wide illumination range, soft light and durability.
6. The lamp has novel appearance, beautiful appearance and convenient installation and maintenance.
7. The lamp can be seated, suction wall mounted, ceiling mounted, and pole mounted. The seat or pole mounting bracket can be adjusted for downward 25° up 45° per gear 5°. The remaining installations can be adjusted downward (to the left) upwards (to the right) for 45°.
8. Luminaires can also be used for high pole installations for large area floodlighting. The installation height of the lamps is 10 to 25 meters.
9. The luminaire is equipped with an explosion-proof cable introduction device, which is suitable for the entry of a three-core rubber sheathed flexible cable or an explosion-proof flexible pipe.
10. This luminaire is suitable for external electromagnetic induction light source. The light source has the advantages of long service life, high luminous efficiency, soft light, good shock resistance, and long-term maintenance-free operation.
Application
Applicable to IIA, IIB, IIC type explosive atmosphere or steam environment, temperature group is T1 ~ T4 zone 1, zone 2 or T1-T6 zone 2 indoor and outdoor hazardous sites or flammable dust environment under a certain thickness of dust General lighting for Zone 21 and Zone 22 with minimum ignition temperature above specified requirements